German Panzerkampfwagen III, Ausf. N (Tamiya)

This is the Tamiya 35 290-3600 kit in 1/35 scale, of the ‘German Panzerkampfwagen III, Ausf. N’.

German Panzerkampfwagen III, Ausf. N

History

During the middles stages of WWII, most German military vehicles had trouble providing adequate support to troops, therefore the N type tank was built to help solve this problem. The N type tank replaced its Marder III main battery with a 7.5cm gun which could fire high-performance high-explosive bursting projectile shells.

From June 1942 through to August 1943, existing J, L, & M models also received these upgrades and 663 tanks were fitted, and another 37 were also upgraded later in 1944. In the summer of 1942 these tanks appeared on the battlefield with their highly explosive shells, and they proved to be highly efficient in their role of reinforcing the ground troops.

They were deployed into newly organized heavy tank battalions, to make up for the lack of Tiger I tanks. As a support tank, the N type was easy to manage and very reliable, and in the latter half of WWII it fought at many fronts.

Source: Tamiya website

Manufacturer

Where I got it

German DAK 15cm s.IG.33 auf Pz.Kpfw.III (Dragon)

This is the Dragon 6904 kit in 1/35 scale, of the ‘German DAK 15cm s-IG.33 aud Pz.Kpfw.III’.

German DAK 15cm s.IG.33 auf Pz.Kpfw.III

History

Germany created a wide number of self-propelled howitzers (SPH) during WWII, these typically being converted from existing tank chassis.
It represents a 15cm s.IG.33 auf Fahrgestell Pz.III which, as its name suggests, mated a 15cm field howitzer with a Panzer III chassis.

Field Marshal Erwin Rommel was seeking heavy artillery mounted on tracked chassis because horse-drawn or truck-drawn howitzers were impractical in the desert.

This SPH was used by the Deutsches Afrika Korps, specifically the 90 leichte Infanterie-Division, in North Africa. It first saw action in September 1942.

Source: Dragon website

Manufacturer

Where I got it

German Pz.Kpfw.III Ausf. D (MiniArt)

This is the MiniArt 35169 kit in 1/35 scale, of the ‘German Pz.Kpfw.III Ausf. D’.

German Pz.Kpfw.III Ausf. D

History

Panzer III was the common name of a medium tank that was developed in the 1930s by Germany and was used extensively in World War II.

The official German designation was Panzerkampfwagen III Sd.Kfz.141 (abbreviated Pz.Kpfw.III) translating as “armoured fighting vehicle”. It was intended to fight other armoured fighting vehicles and serve alongside the infantry support Panzer IV.

From 1942, the last version of Panzer III mounted the 7.5 cm KwK 37 L/24, better suited for infantry support. Production of the Panzer III ended in 1943. However, the Panzer III’s capable chassis provided hulls for the Sturmgeschütz III assault gun until the end of the war.

Source: Wikipedia

Manufacturer

Where I got it

German Pz.Kpfw.III Ausf. C (MiniArt)

This is the MiniArt 35162 kit in 1/35 scale, of the ‘German Pz.Kpfw.III Ausf. C’.

German Pz.Kpfw.III Ausf. C

History

The third vehicle in the development series, the Aust. C, was yet another attempt to improve the design of the suspension.

The Ausf. C still had eight road wheels on each side, with the first and last pairs on a short leaf spring, mounted parallel to the ground. The second and third pairs were supported by a longer leaf-spring assembly. Also featured were a servo-operated epicyclic clutch, brake steering and a new design for the drive sprocket and idler.

By 20 January 1938 there were only twenty-three Pz.Kpfw.III in the total Army Inventory. But this number had increased to forty-two by the end of March 1938. The Ausf. C saw action only in Poland. It was withdrawn from Panzer regiments in February 1940, before the start of the campaign in the West.

Source: MiniArt Website

Manufacturer

Where I got it

German s.IG.33 auf Fahrgestell Pz.Kpfw.III (Sfl) (Dragon)

This is the Dragon 6713 kit in 1/35 scale, of the ‘German s.IG.33 auf Fahrgestell Pz.Kpfw.III’.

German s.IG.33 auf Fahrgestell Pz.Kpfw.III

History

The s.IG.33 auf Fgst. Pz.Kpfw.III (Sfl) was a heavy infantry gun mounted on a StuG.III chassis. The Sturm-Infanteriegeschütz 33B featured a 15cm s.IG.33/1 gun in its boxy superstructure. Just 24 of these 21-tonne weapons were produced by Alkett from December 1941 onwards. They utilized a StuG.III Ausf.E or F/8 chassis.

Five crewmen operated this self-propelled gun that was used exclusively on the Eastern Front. Half fought in the bloody Battle of Stalingrad from October 1942 onwards, where their heavy guns could effectively demolish buildings in the bitter urban combat.

The remaining vehicles didn’t reach Stalingrad because the German 6th Army was encircled by that time, so instead they deployed with the 23rd Panzer Division.

Source: Dragon Models website

Manufacturer

Where I got it

German Pz.Kpfw.III Ausf. B (MiniArt)

This is the MiniArt 35162 kit in 1/35 scale, of the ‘German Pz.Kpfw.III Ausf. B’.

German Pz.Kpfw.III Ausf. B

History

The Ausf. В was the second attempt at a design solution for a tank in the 15-ton class. Only a small number of these design series vehicles were produced to provide a gun-armed Pz.Kpfw for training.

The design of the suspension of the Ausf. В was completely different from that of the Ausf. A. In place of the five road wheels with coil springs, the Ausf. В had eight road wheels per side, divided into pairs, with long leaf springs supporting a pair of road wheels at each end. Further improvements were made by increasing the number of return rollers to three, redesigning the cupola, and altering the rear deck and engine air louvres.

The Ausf. В were issued to Panzer units in 1937. After action in Poland, they were all removed from combatant units in February 1940 because of their unsatisfactory suspension and 15mm armour. In October 1940, the five Ausf. В Fahrgestell, which had been used for the experimental (0-Serie) series of the Sturmgeschütz, were returned to the Armoured troops and used as training vehicles.

Source: MiniArt Website

Manufacturer

Where I got it

German Sturmgeschütz III, Ausf. G (Early version) (Tamiya)

This is the Tamiya, 35 197-2600 kit in 1/35 scale, of the ‘German Sturmgeschütz III, Ausf. G – Early version’.

German Sturmgeschütz III, Ausf. G - Early version

History

Originally intended for infantry support duties, Germany’s Sturmgeschutz (assault gun) and abbreviated “StuG” III first appeared in combat during 1940. It had the durable Panzer III chassis with a completely new superstructure. To keep the vehicles profile as low as possible, the revolving turret was eliminated and the short barreled 75mm L/24 gun was mounted directly onto the hull.

As it was mainly intended for close fire support for the Wehrmacht, it was used as self-propelled artillery against the opposing enemy’s strategic points. However, when the German forces encountered the Russian KV and T-34 tanks on the Eastern front, the situation abruptly changed. To cope with this Russian tank threat, the Germans were forced to upgrade their existing weapons systems. The G-type StuG III built from late 1942 onwards, used a more powerful, long barrel 75mm L/48 gun. The early G-type had a square shaped gun mantlet.

The superstructure was redesigned and an MG42 machine gun with shield, commander’s vision cupola and smoke dischargers were added. The thin steel plates, known as Schurzen (skirts) were attached to the sides of the hull beginning in the spring of 1943. The type-42 assault gun mounted a 105mm howitzer on the StugG III chassis and was developed to fulfill the StuG III’s original role of infantry support. Incorporating several minor changes, about 7,800 G-type StuG III’s were produced.

Source: Tamiya website

Manufacturer

Where I got it

German Panzerkampfwagen III, Ausf. L (Tamiya)

This is the Tamiya 35 215-2600 kit in 1/35 scale, of the ‘German Panzerkampfwagen III, Ausf. L’.

German Panzerkampfwagen III, Ausf. L

History

The German Pz.Kpfw.III, along with the IV, played an active part in the early stages of WWII as their mainstrength tanks. However when they encountered the Russian KV and T-34 tanks on the Eastern Front, the weakness of the Pz.Kpfw.III was revealed and the balance of power tipped in favor of the Russians. Thus the Pz.Kpfw.III underwent constant improvement throughout its career to maintain an advantage. The Pz.Kpfw.III had a number of types, from the A to N. Among them, the Ausf. L was produced from July 1942.

As it was manufactured at the existing tank factory, the basic performance and structure were the same as previous versions with a few modifications. Armament consisted of an improved, long barreled Kwk50 L/60 tank gun, which was effective against the Russian T34 tanks up to a range of 600m, plus two 7.92mm MG34 machine guns. The armor of the front superstructure was increased to 57mm in thickness, and a 20mm thick spaced armor was added to the gun mantlet as well, which increased the tank’s weight by 200kg.

To cope with the added weight, the suspension system was also strengthened. The powerplant was a Maybach HL120TRM, V-12, water cooled engine producing 300 horsepower. In total 635 Ausf. L’s were produced by the end of 1942, and many of them saw active service on the Eastern Front and the North African Front. Although its roll was shortly replaced by the Tiger I and the Panther, the durable chassis of the Pz.Kpfw.III was used for self-propelled guns till the end of the war.

Source: Tamiya website

Manufacturer

Where I got it

German Panzerkampfwagen III, Ausf. F (Dragon)

This is the Dragon 6632 kit in 1/35 scale, of the ‘Panzerkampfwagen III, Ausf. F’.

Panzerkampfwagen III, Ausf. F

History

Panzer III was the common name of a medium tank that was developed in the 1930s by Germany and was used extensively in World War II. The official German designation was Panzerkampfwagen III Sd Kfz. 141 (abbreviated PzKpfw III) translating as “armoured fighting vehicle”.

It was intended to fight other armoured fighting vehicles and serve alongside the infantry-supporting Panzer IV. However, as the Germans faced the formidable T-34, stronger anti-tank guns were needed. Since the Panzer IV had a bigger turret ring, the role was reversed. The Panzer IV mounted the long barreled 7.5 cm KwK 40 gun and engaged in tank-to-tank battles.

The Panzer III became obsolete in this role and for most purposes was supplanted by the Panzer IV. From 1942, the last version of Panzer III mounted the 7.5 cm KwK 37 L/24, better suited for infantry support. Production of the Panzer III ended in 1943. However, the Panzer III’s capable chassis provided hulls for the Sturmgeschütz III until the end of the war.

Source: Wikipedia

Manufacturer

Where I got it

German Panzerkampfwagen III, Ausf. J (Initial production) (Dragon)

This is the Dragon 6463 kit in 1/35 scale, of the ‘German Panzerkampfwagen III, Ausf. J – Initial production’.

German Panzerkampfwagen III, Ausf. J - Initial production

History

The Panzer III was Germany’s main battle tank for the first couple of years of WWII, with earlier Panzer IV variants serving primarily as close-support weapons. However, after Pz.Kpfw.III tanks began encountering more heavily armored T-34 and KV-1 tanks during the invasion of Russia, existing Panzer III models were found to be inadequate for the task.

One solution was to up-gun the tank with a longer and more powerful 5cm KwK 38 L/42 cannon, and to add more armor to the vehicle. Thus the Panzer III Ausf. J was born. It featured 50mm-thick solid armor plates on the front and rear of the hull, an increase from the previous 30mm-thick armor plates.

Among other modifications, the new armor resulted in a ball-mount MG being fitted on the front superstructure and a redesigned driver’s visor.

Source: Dragon website

Manufacturer

Where I got it

German Panzerkampfwagen III, Ausf. N, w/winterketten (Dragon)

This is the Dragon 6606 kit in 1/35 scale, of the ‘German Panzerkampfwagen III, Ausf. N, w/winterketten’.

German Panzerkampfwagen III, Ausf. N, w/winterketten

History

Panzer III was the common name of a medium tank that was developed in the 1930s by Germany and was used extensively in World War II. The official German designation was Panzerkampfwagen III Sd Kfz. 141 (abbreviated Pz.Kpfw.III) translating as “armoured fighting vehicle”.

It was intended to fight other armoured fighting vehicles and serve alongside the infantry-supporting Panzer IV. However, as the Germans faced the formidable T-34, stronger anti-tank guns were needed. Since the Panzer IV had a bigger turret ring, the role was reversed. The Panzer IV mounted the long barreled 7.5 cm KwK 40 gun and engaged in tank-to-tank battles.

The Panzer III became obsolete in this role and for most purposes was supplanted by the Panzer IV. From 1942, the last version of Panzer III mounted the 7.5 cm KwK 37 L/24, better suited for infantry support. Production of the Panzer III ended in 1943. However, the Panzer III’s capable chassis provided hulls for the Sturmgeschütz III until the end of the war.

Source: Wikipedia

Manufacturer

Where I got it