German Elefant (Dragon)

This is the Dragon 6126 kit in 1/35 scale, of the ‘German Elefant’.

German Elefant

History

Elefant (German for “elephant”) was a Schwerer Panzerjäger (“heavy tank destroyer”) of the German Wehrmacht used in small numbers in World War II. It was built in 1943 under the name Ferdinand, after its designer Ferdinand Porsche.

In 1944, after modification of the existing vehicles, they were renamed Elefant. The official German designation was Panzerjäger Tiger (P) and the ordnance inventory designation was Sd.Kfz.184.

Source: Wikipedia

Manufacturer

Where I got it

  • Hobbymesse 2013

German 280mm, Railroad Gun, Leopold (Trumpeter)

This is the Trumpeter 00207 kit in 1/35 scale, of the ‘German 280mm, Railroad Gun, Leopold’.

German 280mm, Railroad Gun, Leopold

History

Although from the mid-19th century people started considering imparting mobility to large caliber artillery pieces by placing them on special railway mountings, it was WWI that gave the impetus to making the railway gun an important part of many European armories. The advantages of railway guns were to quickly concentrated and dispersed as necessary, and by rapid changes of position they could deliver long range harassing fire and remain undetected.

By 1918 the railway gun was in use by nearly all the major combatants and among them Germany was the major country with this powerful armament. But after 1918 the Treaty commissions scrapped all the German railway artillery. After the NSDAP came to power in 1933 the German military began a major rearmament program and on the list of weapons needed were modern railway guns. Before 1933 a great deal of theoretical work had been carried out on future railway guns but it was not until 1934 that the first practical work began on two new designs. In time these were to emerge as the K5 (E) and K12 (E).

The Leopold had an unconfirmed range of 11 miles and fired a pre-engraved projectile weighing approximately 550 pounds. It is fired from a turntable affording a 360degree traverse. The gun has a 70-foot 8-inch barrel held in a sleeve-type cradle. The barrel recoil mechanism, fitted between two arms projecting downward from the cradle, consists of two hydro pneumatic cylinders and a single hydraulic buffer cylinder. A central jack helps support the tremendous weight of the gun and carriage, which amounts to around 230 tons and also serves as a central pivot for the turntable.

The German Leopold Gun was the largest weapon, which lobbed shells at American troops at “Anzio Beach”. The Leopold supported by 24 railcar wheels, was mounted on railroad tracks, which led in and out of mountain tunnels. When not firing, the gun was rolled back into the tunnels out of the sight of Allied reconnaissance. Although both guns had been extensively damaged, Allied forces were able to salvage the Leopold and after reconstruction of the railway, moved the gun to Naples for shipment to the United States. “Anzio Annie” as the gun was known to the Allied troops at Anzio, is the only German railroad gun known to have survived World War II. The Leopold is currently on display at the Aberdeen Proving Ground in Aberdeen, Maryland.

Source: Trumpeter website

Manufacturer

Where I got it

Wheel, Russian (Friulmodel)

Aside

Friulmodel

Aftermarket metal wheels for my Russian vehicles, in 1/35 scale.

Please verify the vendor’s website, before using the information below

Light/Medium

             
BT-7              
T-34/76              
T-26              
T-28              
T-54              
T-55              
T-62              
               

Heavy

             
KV-1 AW-07            
KV-2 AW-07            
KV-8              
KV-8S              
KV-85              
KV-122              
KV-1S              
JS-1 AW-10 AW-12          
JS-2 AW-10 AW-12          
JS-3 AW-10 AW-12          
               

Self-propelled

             
SU-76/76M/76R              
SU-85              
SU-85M              
SU-100              
SU-122              
SU-152 AW-07            
JSU-122 AW-10 AW-12          
JSU-152 AW-10 AW-12          

Source: Friulmodel

Russian Heavy Tank, KV-2 (Trumpeter)

This is the Trumpeter 00312 kit in 1/35 scale, of the Russian Heavy Tank, KV-2′.

Russian Heavy Tank, KV-2

History

Produce at the same time in the M1941 KV-1 type, the KV-2 (Also be called the year in M1941 KV-2 type) also threw in the production.

The KV-2 characteristic is its quick-fried tower shape. The quick-fried tower that equip 152 millimeters of howitzers reports the hexagon keeps the square form, resembling an enormous box.

But, it is said because of the excess, if not on the horizontal plane, dry by heat the tower connect to revolve all and very difficult. Because of such weakness, KV-2 is in actual battle, only used for proceeding to the virtuous soldier the thermodynamic power inhibit, but need not in the battlefield that hour of backstroke break war.

Source: Trumpeter website

Manufacturer

Where I got it

Russian Heavy Tank, KV-122 (Trumpeter)

This is the Trumpeter 01570 kit in 1/35 scale, of the ‘Russian Heavy Tank, KV-122’.

Russian Heavy Tank, KV-122

History

The KV-13 program’s KV-85 prototype was accepted for production as the IS-1 heavy tank.

After testing with both 100mm and 122mm guns, the D-25T 122mm gun was selected as the main armament of the new tank, primarily because of its ready availability and the effect of its large high-explosive shell when attacking German fortifications.

The KV-122 replaced the KV-85, and began mass production as the IS-2.

Source: Trumpeter website

Manufacturer

German Sturmmörser Tiger mit 38 cm RW 61 (Italeri)

This is the Italeri 0299 kit in 1/35 scale, of the ‘German Sturmmörser Tiger mit 38 cm RW 61’.

German Sturmmörser Tiger mit 38 cm RW 61

History

During World War II the German Army had to combat frequently fortified positions or urban defense centers. Due to tactical reason – the troops were at short distance to the enemy lines – artillery and air support could not be engaged.This led to the development of the “Sturm” version of the “Tiger” heavy tank. Onto the heavy-duty chassis the efficient and unique 38 cm mortar was mounted, which had a short range but enormous fire power.

Only few units of the Sturmtiger were built and were mainly used in 1994 at the Eastern front.

Source: Italeri website

Manufacturer

German Pz.Kpfw.IV Ausf. F1/F2 (Early version) (Italeri)

This is the Italeri 6514 kit in 1/35 scale, of the ‘German Pz.Kpfw.IV Ausf. F1/F2, early version’.

German Pz.Kpfw.IV Ausf. F1/F2, early version

History

The Panzer IV was the most extensively used German tank during the Second World War. It represented the “backbone” of the German Panzer Divisions on all operational theaters.The production of Panzer IV Ausf. F, started in 1941, marked a decisive boost in the evolution of the tank. It featured an improved armor on the turret and hull.

The first version of Panzer IV F, featuring the traditional 7.5 cm. KwK 37 short-barreled cannon, were not able to fight successfully against the Soviet T-34 and KV-1 heavy armoured tank.The adoption of the anti-tank design KwK 40 long-barreled cannon, on the Ausf. F2 version, has decisively increased the Panzer IV effectiveness against enemy tanks.

Thanks to its new high velocity and high penetration gun, the Panzer IV became, once again, “lethal” on the battlefields.

Source: Italeri website

Manufacturer

German Panzerkampfwagen VI, Tiger I – Hybrid (Italeri)

This is the Italeri 6487 kit in 1/35 scale, of the ‘German Panzerkampfwagen VI, Tiger I – Hybrid’.

German Panzerkampfwagen VI, Tiger I - Hybrid

History

During the last years of the war, the Germans, to make up for their scarce production output, reconditioned vehicles that were worn-out by the war use.

Period photos show that at the moment of Germany’s defeat, many vehicles had been collected in factories, and were ready to be put back in operation by replacing worn-out or combat-damaged parts. Reliable sources confirm that the last Tigers to come out of assembly lines were reconstructed with salvaged materials: 54 hulls and 32 turrets of the first series, possibly from tanks used in training units.Their wheels were replaced by the latest, full-metal ones, and on some tanks the anti-magnetic “Zimmerit” paste was applied directly in the factory. These tanks were assigned to training schools to form new crews.

In the last weeks of war, they took part in the last engagements of the various Kampfgruppe (combat groups formed with units coming from different detachments) that were trying to stop the Allied units swarming over Germany from East and West.

Source: Italeri website

Manufacturer

German Panzerjäger Elefant (Italeri)

This is the Italeri 0211 kit in 1/35 scale, of the ‘German Panzerjäger Elefant’.

German Panzerjäger Elefant

History

The Elefant tank hunter was probably the biggest armored vehicle built during World War II.Officially designed as Jagdpanzer Tiger (P) Elefant, a considerable number of them were built. After the famous tank battle at Kursk, on the Russian front, they were moved to Italy where they operated until 1944.

Source: Italeri website

Manufacturer

JGSDF Type 90 Tank (Tamiya)

This is the Tamiya 35 208 kit in 1/35 scale, of the ‘JGSDF Type 90 Tank’.

JGSDF Type 90 Tank

History

The Type 90 tank is the current main battle tank (MBT) of the Japan Ground Self-Defense Force (JGSDF). It is built by Mitsubishi Heavy Industries and was designed as a replacement for all deployed Type 61s and a portion of their Type 74 tanks, and entered service in 1990. It is slated to be complemented by the Type 10.

The Type 90 mounts a licensed copy of the German Rheinmetall L44 120mm smoothbore cannon product by Japan Steel Works Limited. This is the same gun that is mounted on the German Leopard 2, American Abrams, and the South Korean K1A1 tanks. The gun is armed and loaded through a mechanical bustle autoloader (conveyor-belt type), developed by Mitsubishi of Japan.

The Type 90 tank is the first western tank to achieve manpower savings by reducing the crew to three through the development of the turret bustle autoloader (with the exception of the turretless Strv 103). This design allows the tank crew to operate without a loader, which allows the use of a smaller turret.

Source: Wikipedia

Manufacturer