German Ferdinand, Kurst 1943 (Dragon)

This is the Dragon 6495 kit in 1/35 scale, of the ‘German Ferdinand, Kursk 1943’.

German Ferdinand, Kursk 1943

History

Elefant (German for “elephant”) was a Schwerer Panzerjäger (“heavy tank destroyer”) of the German Wehrmacht used in small numbers in World War II. It was built in 1943 under the name Ferdinand, after its designer Ferdinand Porsche.

In 1944, after modification of the existing vehicles, they were renamed Elefant. The official German designation was Panzerjäger Tiger (P) and the ordnance inventory designation was Sd.Kfz.184.

Source: Wikipedia

Manufacturer

Where I got it

German RSO/03 w/5 cm PaK 38 (Dragon)

This is the Dragon 6684 kit in 1/35 scale, of the ‘German RSO/03 w/5cm PaK 38’.

German RSO/03 w/5cm PaK 38

History

The Eastern Front presented many difficulties during WWII, one of which was the harsh weather. With few well-paved roads available, rain and snow could render the terrain almost impassable, as Germany found out during their first winter in 1941-42.

For such difficult conditions, Germany realized it needed special tracked vehicles to traverse Russia’s roads and countryside. One solution offered up was the Raupenschlepper Ost (literally “Caterpillar Tractor East”, or “RSO” for short). The RSO, based on the Steyr 1500A light truck, was initially conceived as a prime mover and tractor for towing artillery pieces, although it was eventually put to many uses.

The fully tracked vehicle performed very well in the muddy conditions, and various manufacturers eventually produced 23,000 vehicles before the war ended. The RSO/03 was a later-production variant that had a simple metal cab with a soft-top roof. It was powered to a top speed of 30km/h by a Deutz diesel engine. A pintle was fitted at the rear for towing artillery pieces.

Source: Dragon Models website

Manufacturer

Where I got it

German Panzerkampfwagen VI, Tiger I (Early version) (Academy)

This is the Academy 13239 kit in 1/35 scale, of the ‘German Panzerkampfwagen VI, Tiger I – Early version’.

German Panzerkampfwagen VI, Tiger I – Early version

History

Tiger I is the common name of a German heavy tank developed in 1942 and used in World War II. The final official German designation was Panzerkampfwagen VI Tiger Ausf.E, often shortened to Tiger. It was an answer to the unexpectedly formidable Soviet armour encountered in the initial months of the Axis invasion of the Soviet Union, particularly the T-34 and the KV-1.

The Tiger I design gave the Wehrmacht its first tank mounting the 88mm gun, in its initial armored fighting vehicle-dedicated version, which in its FlaK version had previously demonstrated its effectiveness against both air and ground targets.

During the course of the war, the Tiger I saw combat on all German battlefronts. It was usually deployed in independent tank battalions, which proved to be quite formidable.

Source: Wikipedia

Manufacturer

Where I got it

Russian Medium Tank, T-55A (Tamiya)

This is the Tamiya 35 257-3000 kit in 1/35 scale, of the ‘Russian Medium Tank, T-55A’.

Russian Medium Tank, T-55A

History

T-55 production began in 1958, as opposition between western countries and the Soviet Union grew. It was easy to produce and featured an oblique front hull wall, a compact hull and a semi-spherical turret to limit vulnerability. The T-55 was also well armed with a 100mm main gun.

In the early 60’s, the T-55A with anti-radiation internal liner and anti-radiation cover on the tank commander cupola was developed. T-55 and T-55A were also license built by Czechoslovakia and Poland and some received various improved equipment resulting in many sub-types.

T-55 production continued until the late 70’s and equipped the armies of over 40 countries. It was used in various wars such as the Middle-East Wars and the Gulf War and is still in service today in some countries.

Source: Tamiya website

Manufacturer

Where I got it

  • Hobbymesse 2012

Russian Medium Tank, T-62 A (Tamiya)

This is the Tamiya 35 108-1800 kit in 1/35 scale, of the ‘Russian Medium Tank, T-62 A’.

Russian Medium Tank, T-62 A

History

The T-62 tank has many similarities to the T54/55, both in external shape and mechanism. It made its first official appearance in the victory parade to celebrate the 20th anniversary of the victory over Germany on May 9th 1965.
Source: Tamiya website

Manufacturer

Where I got it

  • Hobbymesse 2012

German JagdPanzer IV L/48 (Dragon)

This is the Dragon 9145 kit in 1/35 scale, of the ‘German JagdPanzer IV L/48’.

German JagdPanzer IV

History

The Jagdpanzer IV, Sd.Kfz.162, was a tank destroyer based on the Panzer IV chassis built in three main variants.

As one of the casemate-style turretless Jagdpanzer (tank destroyer, literally “hunting tank”) designs, it was developed against the wishes of Heinz Guderian, the inspector general of the Panzertruppen, as a replacement for the Sturmgeschütz III (StuG III). Guderian objected against the needless, in his eyes, diversion of resources from Panzer IV tank production, as the Stug III and Sturmgeschütz IV were still more than adequate for their role.

Officially, only the L/48-armed vehicle was named Jagdpanzer IV. The L/70-armed vehicle was named Panzer IV/70.

Source: Wikipedia

Manufacturer

Where I got it

Russian Heavy Self Propelled Gun, SU-152 Howitzer (Trumpeter)

This is the Trumpeter 01571 kit in 1/35 scale, of the ‘Russian Heavy Self propelled, SU-152 Howitzer’.

Russian Heavy Self propelled, SU-152 Howitzer

History

The SU-152 (СУ-152) was a Soviet self-propelled heavy howitzer used during World War II. It mounted a 152mm gun-howitzer on the chassis of a KV-1S heavy tank.

Later production used IS tank chassis and was re-designated as ISU-152. Because of its adopted role of as an impromptu heavy tank destroyer, capable of knocking out the heaviest German armoured vehicles; Tiger, Panther, and Elefant tank destroyers—it was nicknamed Zveroboy, “beast killer”.

Source: Trumpeter website

Manufacturer

Where I got it

German Sturmpanzer IV (Early version) (Tristar)

This is the Tristar 35038 kit in 1/35 scale, of the ‘German Sturmpanzer IV – Early version’.

German Sturmpanzer IV

History

The Sturmpanzer (also known as Sturmpanzer 43 or Sd.Kfz.166) was a German armoured infantry support gun based on the Panzer IV chassis used in the Second World War. It was used at the Battles of Kursk, Anzio, Normandy, and helped to put down the Warsaw Uprising.

It was known by the nickname Brummbär (German: “Grouch”) by Allied intelligence, a name which was not used by the Germans.

Just over 300 vehicles were built and they were assigned to four independent battalions.

Source: Wikipedia

Manufacturer

Where I got it

  • Hobbymesse 2013

German Elefant (Dragon)

This is the Dragon 6126 kit in 1/35 scale, of the ‘German Elefant’.

German Elefant

History

Elefant (German for “elephant”) was a Schwerer Panzerjäger (“heavy tank destroyer”) of the German Wehrmacht used in small numbers in World War II. It was built in 1943 under the name Ferdinand, after its designer Ferdinand Porsche.

In 1944, after modification of the existing vehicles, they were renamed Elefant. The official German designation was Panzerjäger Tiger (P) and the ordnance inventory designation was Sd.Kfz.184.

Source: Wikipedia

Manufacturer

Where I got it

  • Hobbymesse 2013

German 280mm, Railroad Gun, Leopold (Trumpeter)

This is the Trumpeter 00207 kit in 1/35 scale, of the ‘German 280mm, Railroad Gun, Leopold’.

German 280mm, Railroad Gun, Leopold

History

Although from the mid-19th century people started considering imparting mobility to large caliber artillery pieces by placing them on special railway mountings, it was WWI that gave the impetus to making the railway gun an important part of many European armories. The advantages of railway guns were to quickly concentrated and dispersed as necessary, and by rapid changes of position they could deliver long range harassing fire and remain undetected.

By 1918 the railway gun was in use by nearly all the major combatants and among them Germany was the major country with this powerful armament. But after 1918 the Treaty commissions scrapped all the German railway artillery. After the NSDAP came to power in 1933 the German military began a major rearmament program and on the list of weapons needed were modern railway guns. Before 1933 a great deal of theoretical work had been carried out on future railway guns but it was not until 1934 that the first practical work began on two new designs. In time these were to emerge as the K5 (E) and K12 (E).

The Leopold had an unconfirmed range of 11 miles and fired a pre-engraved projectile weighing approximately 550 pounds. It is fired from a turntable affording a 360degree traverse. The gun has a 70-foot 8-inch barrel held in a sleeve-type cradle. The barrel recoil mechanism, fitted between two arms projecting downward from the cradle, consists of two hydro pneumatic cylinders and a single hydraulic buffer cylinder. A central jack helps support the tremendous weight of the gun and carriage, which amounts to around 230 tons and also serves as a central pivot for the turntable.

The German Leopold Gun was the largest weapon, which lobbed shells at American troops at “Anzio Beach”. The Leopold supported by 24 railcar wheels, was mounted on railroad tracks, which led in and out of mountain tunnels. When not firing, the gun was rolled back into the tunnels out of the sight of Allied reconnaissance. Although both guns had been extensively damaged, Allied forces were able to salvage the Leopold and after reconstruction of the railway, moved the gun to Naples for shipment to the United States. “Anzio Annie” as the gun was known to the Allied troops at Anzio, is the only German railroad gun known to have survived World War II. The Leopold is currently on display at the Aberdeen Proving Ground in Aberdeen, Maryland.

Source: Trumpeter website

Manufacturer

Where I got it

Russian Heavy Tank, KV-2 (Trumpeter)

This is the Trumpeter 00312 kit in 1/35 scale, of the Russian Heavy Tank, KV-2′.

Russian Heavy Tank, KV-2

History

Produce at the same time in the M1941 KV-1 type, the KV-2 (Also be called the year in M1941 KV-2 type) also threw in the production.

The KV-2 characteristic is its quick-fried tower shape. The quick-fried tower that equip 152 millimeters of howitzers reports the hexagon keeps the square form, resembling an enormous box.

But, it is said because of the excess, if not on the horizontal plane, dry by heat the tower connect to revolve all and very difficult. Because of such weakness, KV-2 is in actual battle, only used for proceeding to the virtuous soldier the thermodynamic power inhibit, but need not in the battlefield that hour of backstroke break war.

Source: Trumpeter website

Manufacturer

Where I got it

RMS Titanic (Academy)

This is the Academy/Minicraft 1405 kit in 1/350 scale, of the ‘RMS Titanic’.

RMS Titanic

History

RMS Titanic was a British passenger liner that sank in the North Atlantic Ocean on 15 April 1912 after colliding with an iceberg during her maiden voyage from Southampton, UK to New York City, US.

The sinking of Titanic caused the deaths of more than 1,500 people in one of the deadliest peacetime maritime disasters in modern history. The RMS Titanic was the largest ship afloat at the time it entered service.

Titanic was the second of three Olympic class ocean liners operated by the White Star Line, and was built by the Harland and Wolff shipyard in Belfast with Thomas Andrews as her naval architect. Andrews was among those lost during the sinking. On her maiden voyage, she carried 2,224 passengers and crew.

Source: Wikipedia

Manufacturer

Where I got it

  • Loppemarked, Carlsberg