German Geschützwagen (Trumpeter)

This is the Trumpeter 01509 kit in 1/35 scale, of the ‘German Geschützwagen’.

German Geschützwagen

History

For the armored train units of Type BP42, the artillery was increased, following Russian and Polish examples, to four guns, which were not, though, mounted two to a car as in the latter types, but one per separately built ten-sided rotating turret, in order to avoid too-great losses from a direct hit.

The two halves of the train, before and behind the locomotive were identical and consisted of one artillery car with one 10cm le.F.H 14/19(p) gun, one command and infantry car and one artillery and anti-aircraft car with one 7.62cm F.K.295/l(r) and one 2cm anti-aircraft quadruple unit.

Source: Trumpeter website

Manufacturer

Russian Heavy Tank, KV-1 model 1942 (Trumpeter)

This is the Trumpeter 00359 kit in 1/35 scale, of the ‘Russian Heavy Tank, KV-1 model 1942’.

Russian Heavy Tank, KV-1 model 1942

History

Because warlike vehemence, the Kriov factory gave birth to casts the KV-1 of the quick-fried tower, nameding after the KV-1 model 1942 (heavy cast Turret), Turret in this kind of foundry contain better bullet-proof features, the armor thickness also comes to 95mm of, the main firecrackers also changed to pack better types ZIS-5s in function 76.2mm artillery.
Source: Trumpeter website

Manufacturer

Russian Heavy Tank, KV-1 model 1942, Lightweight Cast Turret (Trumpeter)

This is the Trumpeter 00360 kit in 1/35 scale, of the ‘Russian Heavy Tank, KV-1 model 1942, Lightweight Cast Turret’.

Russian Heavy Tank, KV-1 model 1942, Lightweight Cast Tank

History

The superior armor protection of the heavy cast turret on the KV-1 model 1942 tank has its cost! The weight of the tank now reaches 47 tones and this weight are consider heavy even for a modern tank standard!

The KV series utilize the same engine without major changes and the more and more added heavy weight drops the maximum speed from 35 Kilometers/hours to 28 kilometers/hour.

Off road performances are even worst and hard to operate. To solve the problem, a lightweight cast turret was born. One feature helps to identify turret of this type – A large cast ring around rear machine gun mount.

Source: Trumpeter website

Manufacturer

German Sd.Kfz.7 KM m 11 Mittlere Zugkraftwagen 8t (Late version) (Trumpeter)

This is the Trumpeter 01507 kit in 1/35 scale, of the ‘German Sd.Kfz.7 KM m 11 Mittlere Zugkraftwagen 8t – Late version’.

German Sd.Kfz.7 KM m 11 Mittlere Zugkraftwagen 8t - Late version

History

Starting in 1942, the 5-ton Zugkrafywagen was superseded by the 8-ton Zugkrafywagen as the selfpropelled mount for the 3.7cm FlaK. The 3.7 cm FlaK 36 was replaced by the 3.7 cm FlaK toward the end of 1944.

Starting in 1943, an armor radiator shield and crew cab were introduced as protection against shell fragments and small-arms fire.

Production of the Sd.Kfz.7/2 began in 1942, and continued to the end of the war, with about 1000 produced by the end of January 1945. Initially, there were nine Sd.Kfz.7/2 in each FlaK-Kompanie or Batterie; increased to 12 in October 1943.

Source: Trumpeter website

Manufacturer

German Mörser Karl-Gerät on railway transport carrier (Initial version) (Trumpeter)

This is the Trumpeter 00208 kit in 1/35 scale, of the ‘German Mörser Karl-Gerat 040/041 on railway transport carrier – Initial version’.

German Mörser Karl-Gerat 040/041 on railway transport carrier - Initial version

History

The self-propelled version of the 60cm siege mortar was ordered in June 1937. General Karl Becker of the Artillery was involved in the development; hence the name Karl was used to describe the gun. The driving trials were held at Unterlüss in May 1940. Delivery of the six production vehicles took place from November 1940 to August 1941. In February 1941, discussions commenced. Concerning increasing the range of the weapon, and in May 1942, 54cm barrels (Gerät 041) were ordered for the six vehicles.

At a conference with Hitler in March 1943, it was stated that the first 54cm Gerät 041 would be delivered by June 1943, and the third, by mid-August. The 60cm and 54cm barrels appear to have been interchanged as required. In 1945, US forces captured vehicle II with a 60cm, and vehicle V with a 54cm. The prototype chassis, built in 1939, had eight road wheels with external swing arms. Production Karl had eleven road wheels.

Ammunition was transported in a tracked Munitionsschlepper converted from the PzKpfw IV, four rounds in each Schlepper. For the 60cm Gerät 040, the s Be Granate weighed 2.117 tons and the Ie Be Granate, 1.70 tons; in this case of the 54cm Gerät 041, 1.58 tons and 1.25 tons respectively. Maximum rate of the fire was 6 rph (rounds per hour). Guns I-IV went to the Russian Front in July 1941 with the 628th schwere Artillerie Abteilung. They saw action at various sites, including Lemburg in that year.

The best known action was against Sevastopol in 1942. Later, four guns were issued to the 833rd schwere Artillerie Abteilung (mot). These guns had the names Adam, Eve (1st Batt.) and Thor, Odin (2nd Batt.) The names for guns V and VI were Loki and Ziu.

Source: Trumpeter website

Manufacturer

German Panzerkampfwagen, KV-1 756(r) (Trumpeter)

This is the Trumpeter 00366 kit in 1/35 scale, of the ‘German Panzerkampfwagen, KV-1 756(r)’.

German Panzerkampfwagen, KV-1 756(r)

History

Not enough problem in ability in protection in armor that aim at the KV-1 1941 type, design the personnel proceeded a series enhance the work of the armor, turret of the KV-1 improving behind comes to an about 75mm of thicknesses.

Form the KV-1 shown at the bottom of the lefthand page there arose this KV-1 with a German 7.5cm L/43 cannon and German commander’s cupola. The armour was sprayed with German camouflage paint.

Source: Trumpeter website

Manufacturer

Russian Heavy Tank, KV-85 (Trumpeter)

This is the Trumpeter 01569 kit in 1/35 scale, of the ‘Russian Heavy Tank, KV-85’.

Russian Heavy Tank, KV-85

History

A stopgap upgrade to the KV series was the short-lived KV-85 or Objekt 239. This was a KV-1S with a new turret designed for the IS-85, mounting the same 85mm D-5T gun as the SU-85 and early versions of the T-34-85.

Already-high demand for the gun slowed production of the KV-85 tremendously, and only 148 were built before the KV design was replaced. The KV-85 was produced in the fall and winter of 1943-44; they were sent to the front as of September 1943, and production of the KV-85 was stopped by the spring of 1944 once the IS-2 entered full scale production.

Source: Trumpeter website

Manufacturer

German Panzerjägerwagen, volume 2 (Trumpeter)

This is the Trumpeter 00369 kit in 1/35 scale, of the ‘German Panzerjägerwagen, volume 2’.

German Panzerjägerwagen, volume 2

History

The Panzerjagerwagen with Panzer IV turret and long 7.5-cm KwK cannon, were an important innovation of the BP 44 armor train type.

It was the armored pursuit car replace by the earlier pusher car. That now gave the train an effective means of against Russian tanks. In this instance, a program of new construction had been planned in 1944 by German Army: 8 BP 44 armored trains.

Source: Trumpeter website

Manufacturer

Where I got it

German Panzerjägerwagen, volume 1 (Trumpeter)

This is the Trumpeter 00386 kit in 1/35 scale, of the ‘German Panzerjägerwagen, volume 1’.

German Panzerjägerwagen, volume 1

History

The Panzerjagerwagen with Panzer IV turret and long 7.5-cm KwK cannon, were an important innovation of the BP 44 armor train type.

It was the armored pursuit car replace by the earlier pusher car. That now gave the train an effective means of against Russian tanks. In this instance, a program of new construction had been planned in 1944 by German Army: 8 BP 44 armored trains.

Source: Trumpeter website

Manufacturer

Where I got it

Russian Heavy Tank, KV-1 model 1941 small turret (Trumpeter)

This is the Trumpeter 00356 kit in 1/35 scale, of the ‘Russian Heavy Tank, KV-1 model 1941 small turret’.

Russian Heavy Tank, KV-1 model 1941 small turret

History

The KV type tank that research to manufacture wins in the competition of the heavy type tank from the factory of Kirov in 1939, ising named after KV-1.

KV-1 the beginning batch quantity produces in 1942 February, at the beginning of the production model number calls the KV-1 model 1941 “small turret”, first material in KV-1 types L-11s 76.2mm of artillery; July of 1940, the heavy type in the series of KV tank production be transfered by the factory of Kirov the 100 factory production, henceforth the KV-1 that produce all changed to pack better types F-32s in function 76.2mm of artillery.

Source: Trumpeter website

Manufacturer

Where I got it

Russian Heavy Tank, KV-2 model 1939, big turret (Trumpeter)

This is the Trumpeter 00311 kit in 1/35 scale, of the ‘Russian Heavy Tank, KV-2 model 1939, big turret’.

Russian Heavy Tank, KV-2 model 1939, big turret

History

The KV heavy tank was designed and used as heavy break-through tank. To a tank of this task, the shortcomings of its L-11 main gun, which is not good at dealing with enemies’ bunkers and fortifications, could be fatal! So a heavy tank carrying a much bigger gun to better do the job was created along side the 76.2mm gun tanks.

The first of this type uses a new big high turret of 7 sides that mounting the 152mm M-10 howitzer. This version, which had many detail differences to the later standard type was usually dubbed KV ‘Big Turret’ or KV-2 Model 1939. As such a big turret on the usual KV hull proved to be very un-maneuverable it soon earned a funny nickname of “Mobile washroom”!

Source: Trumpeter website

Manufacturer

Where I got it

Russian Heavy Tank, KV-1 Ehkranami (Trumpeter)

This is the Trumpeter 00357 kit in 1/35 scale, of the ‘Russian Heavy Tank, KV-1 Ehkranami’.

Russian Heavy Tank, KV-1 Ehkranami

History

To solve the problem of the fear of inadequacy of armor protection on the already heavily armored KV-1 Model 1941, It was decided to bring the armor protection of the turret up to a thickness to 75mm.

Since the capability of producing such a thick armor plate was lacking at the time, so an interim solution was to use bolt on armor, 25mm of thickness, bolt directly to the outside of the turret and some other parts of the hull. This type was usually referred to as KV-1s Ehkranami.

Source: Trumpeter website

Manufacturer

Where I got it